1. Anti-climb fence Panels
Manufactured using 4mm wire welded at each intersection creating a strong and durable panel.
The mesh aperture consists of a 76.2x12.7mm mesh spacing providing ultimate protection against climbing and cut-through with excellent see through visibility.
2. Anti-clim fence Post system
Square hollow section posts provide both strength and ety. Plastic post-tops prevent water ingress which can cause rust.
Posts can be manufactured to suit the site, either to be concreted into the ground, Baseplated for fixing to a concrete base,and/or cranked to receive another panel or for razor wire
3. Anti-climb fence Fixing
If you contact us, the professional installation drawing will be provide.
4. Anti climb fence Specifications
Heights above the standard range can be achieved special tailor-made.
| Standard sizes |
| Fence heights (mtrs) | Panel size HxW (mm) | Wire diameter (mm) | Post centres (mm) | Post section RHS (mm) |
| 1.8 | 1800x2515 | 4 | 2540 | 60x60x3 |
| .2.0 | 2000x2515 | 4 | 2540 | 60x60x3 |
| 2.4 | 2400x2515 | 4 | 2540 | 60x60x3 |
| 2.7 | 2700x2515 | 4 | 2540 | 80x80x3 |
| 3.0 | 3000x2515 | 4 | 2540 | 80x80x3 |
The WireWorks Anti-Climb fence is a unique perimeter security product that maintains a guarded display ofvisual screening balancing the need to delay and deter an attack. WireWorks Anti-Climb fencing combines a mesh that discourages cutting and climbing with framework that can support a total security platform.
The distinguishing feature of WireWorks Anti-Climb is the very tight construction of its anti-scale and anti-cutting welded wire mesh. It's very difficult to get hand/footholds on this fence and the cutting implements required to sever its welded heavy steel wire just can't fit into the minimal spaces of the mesh. The fence design of WireWorks Anti-Climb includes our Impasse rail, giving this fence system the ability to run wiring and cabling for intrusion detection systems and monitoring equipment.
